Change Battery In Cadillac Key Fob
Change Battery In Cadillac Key Fob. For the second time since i've owned my cts, my fob battery has been dead as a doornail without warning. Put it aside so you can properly dispose of it.
Press the button and pull out on the key blade. Now use a flat head screwdriver to pry out the case at the exposed opening. Use a flat head screwdriver to separate the sides of the case.
On The Side Of The Battery There Is A Chrome Or Silver Button.
Press the button and pull out on the key blade. This battery is very common and you can find it in most hardware stores, autozone, locksmith shop, and online. Locate the battery and remove it.
Insert A Small Flathead Screwdriver Into That Opening, And Carefully Separate The Two Sides Of The Case.
You may have to use the screwdriver to pop the old battery out. Open the cover to reveal the battery that is. Carefully remove the old battery and.
Reasons Your Car Won’t Detect The Key Fob.
Once the key fob has been opened, you’ll notice that one side of the casing holds the circuit board, and the other side. Remove the old battery and replace it with the new one with care. Press down on the new battery to pop it into place.
Put The Case Back Together.
An easy way to replace your cadillac remote key fob battery. Inspect your fob and you will find a small slot for putting a coin or small flathead screwdriver into to open, once open carefully take out the old battery and replace with a cr2032 battery and close the case making sure it snaps back together and you're done. Insert the key in the opening to open the key.
Separate The Key Fob Case.
Press on it as you pull the emergency key out. Like almost all modern fobs, the cadillac key requires a cr2032 battery. Make sure that the positive side is facing down when inserting the new.
Comments
Post a Comment